1Z0-1075-21 PDF Dumps Real 2022 Recently Updated Questions
Released Oracle 1Z0-1075-21 Updated Questions PDF
Oracle 1Z0-1075-21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 23
A plantruns 24x7 daily using three continuous shifts of 8 hours each. One unit of an equipment resource R1 is assigned to each of the three shifts. On a specific work order, the resource R1 is required to work for 2 hours.
The resource is set up with an efficiency of 50% and utilization of 100%. R1 is scheduled to start on the given work order at noon.
What time will R1 be scheduled to finish, assuming no calendar exceptions have been set?
- A. 1:00 PM
- B. 12:30 PM
- C. 2:00 PM
- D. 4:00 PM
- E. 8:00 PM
Answer: D
NEW QUESTION 24
Your customer has multiple distribution centers and a few manufacturing plants. Plants make different items with some overlap between them in terms of productsmanufactured. The distribution centers stock parts from all plants. A Corporate Engineering team is responsible for centrally defining items and catalogues. This team defines the items and sets the attributes for most parameters. The respective distribution centers and manufacturing plants are allowed to change some attributes locally.
Identify two different ways of achieving this requirement.
- A. Set up Plants and Distribution Centers as Inventory organizations and Corporate Engineering organization as Inventory Organization.
- B. Set up Plants and Distribution Centers as Inventory organizations and Corporate Engineering organization as Item Organization
- C. Set up Plants as Inventory Organizations, Distribution Centers as Inventory Organizations, and Corporate Engineering organizations as Item Organization.
- D. Set up Plants as Inventory Organizations, Distribution Centers as Item Organizations, and CorporateEngineering organization as Inventory Organization.
- E. Set up Plants as Inventory Organizations, Distribution Centers as Item Organizations, and Corporate Engineering organization as Item Organization.
Answer: B,C
NEW QUESTION 25
You arereviewing the production status of your manufacturing plant shop floor as a production supervisor.
Your production manager wants a report on a work order status which is reserved against a particular customer. The final assembly of the work order is serialized.
Which option shows the steps to complete the task using the mobile application?
- A. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page> Select required work orders> Click Social icon (OSN) > Select recipient, and click Share.
- B. Search the work order by customer name to open the work order details page> Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, andclick Send.
- C. Select the infotile Customer to open the work order details page> Click Actions and select the E-mail icon> Select required work orders>Select the e-mail client, enter the recipient's e-mail, and click Send.
- D. Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient's e-mail, and click Send.
Answer: D
NEW QUESTION 26
Your customer hasthe following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goodsas one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.
- A. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
- B. The Work Definition versions can be used to tie the Work Orders.
- C. The two Work Definitions can be tied through Projector Seiban numbers.
- D. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.
Answer: B
NEW QUESTION 27
Your customer is a light assembly manufacturing company that doesn't require shop floor control. A manufacturing engineer wants to generate a work definition automatically for some items, and wants to eliminate the explicit maintenance of work definitions.
Which three steps must be completed and verified in the Work Definition area?
- A. Ensure there is only one default standard operation at a given point in time.
- B. Select a resource that is to be used inautomatic work definition by enabling the attribute Default for automatic work definition.
- C. Ensure the item isa standard item with a secondary item structure.
- D. Select a standard operation that is to be used in automatic work definition by enabling the attribute Default for automatic work definition.
- E. Ensure the predefined work definition name ORA_MAIN name is active.
Answer: C,D,E
NEW QUESTION 28
Identify two reports that provide work ordercost-related information to the costing user.
- A. Purchase Variance Summary
- B. Work order Operational Analysis
- C. WIP Balance by Plant
- D. Cost Accounting Dashboard
Answer: B,D
NEW QUESTION 29
Identify four parameters that are considered in the calculation of manufacturing lead time in Oracle Manufacturing Cloud.
- A. Resource calendars of the work centers involved
- B. The shifts are defined in the plant calendar
- C. Plant calendar exceptions
- D. The primary work definition of the item
- E. Resource calendar exceptions
- F. The lot size of the item
Answer: B,D,E,F
NEW QUESTION 30
You have been asked to set up cost estimates for 10 different purchased items. Which two steps could be used to accomplish this task?
- A. Run the ESS process "Update Item Cost Estimate".
- B. Use the Mass Edit functionality.
- C. Call web service.
- D. Enter cost estimates directly into UI.
- E. Import spreadsheet.
Answer: D,E
NEW QUESTION 31
Identify the three sources from which supply chain orchestration (SCO) can create the work orders.
- A. Order Management
- B. Planning
- C. Inventory Min-Max Planning
- D. Procurement
- E. Quality
Answer: A,B,D
NEW QUESTION 32
Your customer wants to mass create and modify Work Definitions and the relevant operation, items, and resources available in the spreadsheet.
Which two operations are not supported using ADFDI (Oracle Application Development Framework Desktop Integration)?
- A. Create Work Definitions
- B. Populate Descriptive flexfields
- C. Create and update ATO (Assemble To Order) model work definitions
- D. Update Work Definitions
Answer: B,C
NEW QUESTION 33
You are monitoring the production status on your shop floor. The production operator informs you that a particular resource that was not functioning for the past week is now back in operation.
Which option shows the steps to quickly release the work orders affected by this operation, which were put on hold using the mobile application?
- A. Select the infotile On Hold> Select a work order you want to release> Swipe left on the work ordername> Tap or click the Release action, and click OK
- B. Select the infotile Unreleased> Select a work order you want to release>Swipe left on the work order name> Tap or click the Release action, and click OK
- C. Select the infotile On Hold> Select awork order you want to release> Select the work order operation on hold > Swipe left on the work order name> Tap or click the Release action, and click OK
- D. Select the infertile Dispatch List> Select awork order operation you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK
Answer: D
NEW QUESTION 34
Your customer has completed the required setup steps for automatic work definition. Identify the option that shows the navigation steps needed to create an automaticwork definition.
- A. Manufacturing> Work Definition> Manage Standard Operations> Select default standard operation> Actions> Create automatic work definition
- B. Manufacturing > Work Definition> Manage Standard Operations> Create automatic definition
- C. Manufacturing > Work Definition> Manage Work Definitions> Actions> Create automatic work definition
- D. Product Management> Product Information Management> Items> Edit Item > Actions> Create automatic work definition
Answer: A
NEW QUESTION 35
In a manufacturingcloud implementation, production operators want to perform work order updates using Dispatch List.
Identify two tasks that the Dispatch List allows the production users to perform.
- A. Report Component Returns
- B. Report Cost Transactions
- C. Report Resource Transactions
- D. Report Receipts
- E. Report Material Transactions by Quantity and Serial Number
Answer: C,E
NEW QUESTION 36
Planning Central has collected manufacturing data for a Work Order WO-2045 (Make Item AS1000), where actual duration of work order is 2 days. Item AS1000 manufacturing lead time is 1.25 days.
A plan is run and the Work Order WO-2045 is rescheduled.
Identify the duration of the rescheduled Work Order WO- 2045.
- A. Rescheduled Work Order WO-2045 duration = 1.25 days
- B. Rescheduled Work Order WO-2045 duration = 3.25days
- C. Rescheduled Work Order WO-2045 duration = 0.75days
- D. Rescheduled Work Order WO-2045 duration = 2 days
Answer: C
NEW QUESTION 37
Your customer has defined the work definitions. They have created and saved a new version for the work definition and want to edit that work definition.
Which two attributes cannot be updated using the Edit Work Definition Details action?
- A. State Date
- B. Version
- C. Production Priority
- D. CostingPriority
Answer: A,B
NEW QUESTION 38
In what three ways can you set the overcompletion tolerance for a subcomponent yield, so the job order can report the excess production completion?
- A. Overcompletion Tolerance Type = Amount,value = 0
- B. Overcompletion Tolerance Type = Percentage, value = 0
- C. Overcompletion Tolerance Type = Percentage, value > 0
- D. Overcompletion Tolerance Type = Percentage, value = 100
- E. Overcompletion Tolerance Type = Amount, value > 0
Answer: A,B,C
NEW QUESTION 39
Identify three types of Item Quantities displayed in the Work Order History tab.
- A. Remaining Quantity
- B. Completed Quantity
- C. Scrapped Quantity
- D. In Process Quantity
- E. Total Quantity
Answer: A,B,C
NEW QUESTION 40
Work order costs are computed based on material and resource transactions reported and the cost method of the product. In a manufacturing plant, the production operator has completed a work order WO-001 ensuring proper materials and resource transactions. The materials are costed and resources are defined with rates.
A cost accountant has created cost accounting distributions. Upon reviewing the accounting distributions of the work order WO-001, resources charged to the work order are missing.
Identify the Concurrent Request that needs to be submitted to transfer resource charges to cost accounting.
- A. Create accounting
- B. Transfer Costs to Cost Management
- C. Transfer Transactions from Production to Costing
- D. Transfer Transactions from Inventory to Costing
Answer: C
NEW QUESTION 41
In a Manufacturing Cloud post productionsupport environment, a user wants to update some of the operations in the work orders by using the Midpoint Scheduling feature. However, the user is unable to update any of the orders.
Identify two reasons.
- A. The operations are missing sequence.
- B. None of the operations include scheduled resources.
- C. The scheduled resources are not part of the organization selected by the user.
- D. The work order operations do not have operations start or completion date.
Answer: A,B
NEW QUESTION 42
......
1Z0-1075-21 Dumps and Practice Test (65 Exam Questions): https://www.testbraindump.com/1Z0-1075-21-exam-prep.html
