2021 350-601 Premium Files Test pdf - Free Dumps Collection [Q23-Q43]

2021 350-601 Premium Files Test pdf - Free Dumps Collection

Get ready to pass the 350-601 Exam right now using our CCNP Data Center Exam Package

NEW QUESTION 23
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.

Answer:

Explanation:

Explanation

NEW QUESTION 24
A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction. which configuration should be implemented to achieve this objective?

A. Option D
B. Option B
C. Option A
D. Option C

Answer: B

NEW QUESTION 25
A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?

A. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed.
B. The host in EPG Client can connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be able to initiate a separate TCP connection to a host port with TCP source port 80.
C. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host is EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.
D. The host in EPG Client Can connect to TCP destination port 80 on the webserver in EGP Web. The webserver can initiate a separate TCP connection to a host port with TCP source port 80.

Answer: B

NEW QUESTION 26
Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Answer:

Explanation:

NEW QUESTION 27
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the Physical connection is established?

A. Option D
B. Option B
C. Option A
D. Option C

Answer: B

NEW QUESTION 28
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?

A. Attempt to simultaneously upgrade more than three cards
B. The kickstart image is installed by using the install all kickstart image system image command
C. Change of the configuration settings or the network connections during the upgrade process
D. The show install all impact command is not issued Before the upgrade

Answer: C

NEW QUESTION 29
What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment?

A. SSH
B. NX-API
C. Open Agent Container
D. XML management interface

Answer: B

Explanation:
Section: Automation

NEW QUESTION 30
An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows. Which two resources must be specified in the vHBA template? (Choose two)

A. VLAN ID
B. Fabric ID
C. MAC addresses
D. WWVPN Pool
E. WWIN

Answer: D,E

NEW QUESTION 31
An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: A

NEW QUESTION 32
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two characteristics must be considered? (Choose two.)

A. A SPAN source port cannot be a destination SPAN port.
B. The rx/tx option is available for VLAN or VSAN SPAN sessions.
C. Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.
D. SPAN source port can be monitored in multiple SPAN sessions.
E. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.

Answer: A,E

NEW QUESTION 33
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.)

A. Maintenance Policy
B. Boot Policy
C. Power Control Policy
D. Global Policy
E. Reboot Policy

Answer: A,E

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem

NEW QUESTION 34
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

A. EPLD updates are nondisruptive to traffic flow
B. EPLD updates are installed only via the Cisco DCNM GUI
C. EPLD packages update hardware functionality on a device
D. EPLD bundles are released separately from a Cisco MDS NX-OS release

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.htm

NEW QUESTION 35
Refer to the exhibit.

An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)

A. Option A
B. Option D
C. Option B
D. Option C
E. Option E

Answer: B,E

NEW QUESTION 36
What is a benefit of using the Cisco UCS Lightweight upgrade feature?

A. Security updates are scheduled with the next reboot of the fabric interconnects.
B. All servers are rebooted to push the latest updates.
C. The firmware version of a component is updated only when it has been modified
D. A soft reboot is available for the fabric interconnects.

Answer: C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Administration/2-0

NEW QUESTION 37
A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. Which action should be taken to implement the same action on Nexus switches?

A. Use the exit command to leave the configuration mode and save the configuration automatically.
B. Use the write memory command to save the configuration.
C. Use the wri command to use the copy running-config startup-config command.
D. Use the alias command to use the write memory command.

Answer: D

Explanation:
Section: Network
Explanation/Reference:
https://community.cisco.com/t5/switching/write-command-on-nexus-switchs/td-p/1958386

NEW QUESTION 38
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)

A. Configure the switchport mode SD under interface fc2/2.
B. Configure the switchport monitor under interface fc2/2
C. Configure switchport speed 4000 under interface fc2/2.
D. Configure session type fc under monitor session 1.
E. Configure the switchport mode SD under interface tc2/1.

Answer: B,C

NEW QUESTION 39
Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true.

A. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.
B. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.
C. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.
D. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.

Answer: A

NEW QUESTION 40
Which statement describes the rolling EPLD upgrade on a Cisco MDS 9000 Series Switch?

A. The standby supervisor module is capable of performing the upgrade.
B. Only the modules that are being upgraded are disrupted.
C. An EPLD upgrade is nondisruptive.
D. All modules on the switch are disrupted.

Answer: B

Explanation:
Section: Compute

NEW QUESTION 41
Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

A. logical configuration
B. all configuration
C. system configuration
D. full state

Answer: D

NEW QUESTION 42
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?
A)

B)

C)

D)