300-610 Training & Certification Get Latest CCNP Data Center Updated on Oct 05, 2021
Certification Training for 300-610 Exam Dumps Test Engine
NEW QUESTION 41
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Erase the configuration of both fabric interconnects.
- B. Run the disable fips-mode command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Run the connect local-management command on each fabric interconnect.
Answer: C
Explanation:
Section: Compute Design
NEW QUESTION 42
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 43
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. supports Layer 3 port channels
- B. maintains single control plane
- C. disables spanning-tree
- D. no spanning-tree blocked ports
- E. uses all available uplink bandwidth
Answer: D,E
NEW QUESTION 44
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- C. A separate DSCP value must be configured for all FCIP VSAN traffic.
- D. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
Answer: A
NEW QUESTION 45
DRAG DROP
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1238898
NEW QUESTION 46
A network engineer is designing a Cisco Hyperflex infrastructure. The Infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. server message block
- B. Fibre Channel over Ethernet
- C. raw device mapping
- D. Internet Small Computer Systems Interface
Answer: C
Explanation:
Source is from Cisco Press Hyperconverged Infrastructure Data Centers: Demystifying HCI.
NEW QUESTION 47
An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized.
Which two elements should be used in this environment? (Choose two.)
- A. Cisco UCS VIC 1280
- B. Cisco UCS VIC 1225
- C. eight twinax cables from each I/O module to each fabric interconnect
- D. four twinax cables from each I/O module to each fabric interconnect
- E. Cisco UCS M81KR
Answer: A,C
NEW QUESTION 48
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 49
A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure.
To cut operating costs, the client's data center is shared with other organizations. The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server.
Which two policies must be used to meet these requirements? (Choose two.)
- A. post error pause
- B. quiet boot
- C. ASPM support
- D. CDN control
- E. front panel lockout
Answer: B,E
NEW QUESTION 50
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. delay restore
- B. ip arp synchronize
- C. auto-recovery
- D. system priority
- E. peer-gateway
Answer: A,C
Explanation:
System priority is related to LACP, not vPC, so it is out. ARP s
Reference:
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/nx-os-software/212589-understanding-vpc-election-process.html
NEW QUESTION 51
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations.
Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. delay restore
- B. ip arp synchronize
- C. auto-recovery
- D. system priority
- E. peer-gateway
Answer: A,C
NEW QUESTION 52
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 53
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.
Which solution meets these requirements?
- A. MACsec
- B. L2TPv3
- C. L2TPv2
- D. IPsec
Answer: A
NEW QUESTION 54
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. server message block
- B. raw device mapping
- C. Fibre Channel over Ethernet
- D. Internet Small Computer Systems Interface
Answer: C
Explanation:
Reference:
HyperFlex_HX_DataPlatformSoftware/Network_External_Storage_Management_Guide/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0_chapter_010.html
NEW QUESTION 55
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 56
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION 57
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Erase the configuration of both fabric interconnects.
- B. Run the disable fips-mode command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Run the connect local-management command on each fabric interconnect.
Answer: C
Explanation:
Section: Compute Design
Explanation/Reference:
NEW QUESTION 58
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus
7700 Series Switches?
- A. Guest shell
- B. Postman
- C. NX-API
- D. Bash shell
Answer: C
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/ guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Guide_7x_chapter_010010.html
NEW QUESTION 59
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)
- A. port number
- B. type
- C. preshared key
- D. hostname
- E. identifying tag
Answer: A,D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://en.wikipedia.org/wiki/ISCSI
NEW QUESTION 60
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. LLDP
- B. UDLD
- C. BFD
- D. MCP
Answer: B
Explanation:
Section: Network Design
NEW QUESTION 61
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco CloudCenter
- B. Cisco Virtual Topology System
- C. Cisco Nexus Fabric Manager
- D. Cisco Data Center Network Manager
Answer: D
NEW QUESTION 62
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. VPC+
- B. UDLD
- C. EVPN
- D. OSPF
Answer: C
Explanation:
Section: Network Design
NEW QUESTION 63
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?
- A. NPIV
- B. end host
- C. Fibre Channel
- D. switch
Answer: D
NEW QUESTION 64
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Each uplink that connects an IOM is configured as a discrete link.
- B. Cisco UCS Manager creates a single fabric port channel.
- C. The port channel is disabled until an administrator enables it manually.
- D. Cisco UCS Manager creates two separate fabric port channels.
Answer: D
NEW QUESTION 65
......
Step by Step Guide to Prepare for 300-610 Exam: https://www.testbraindump.com/300-610-exam-prep.html
CCNP Data Center 300-610 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1fhKQ1LxAf-lf-VCT_gzzc1st-qhqHEKT
