[Aug-2021] Pass Adobe AD0-C102 Exam in First Attempt Guaranteed!
Full AD0-C102 Practice Test and 62 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 18
You are color collecting some clips using the Vectorscope YUV in the Lumetri Scopes panel as a reference.
What is the function of this scope?
- A. It displays the vector information of a non-raster dip. such as an Illustrator file.
- B. It displays a circular chart similar to a color wheel, that shows the videos chrominance information.
- C. It displays a horizontal chart with luminance information matching left and right of the clip.
- D. It displays the RGB information on the dip using luminance values.
Answer: B
NEW QUESTION 19
You are collaborating with othereditor and you have all been givena collection of Motion GraphicsTemplates to use in shared projects.
How can you install multiple Motion Graphics Templates all at once for use in Premiere Pro?
- A. From the Graphics menu In Premiere Pro. choose Install Motion Graphics Templates then select ail needed .mogrt Files.
- B. In the Libraries Panel menu In Premiere Pro. select Install Motion Graphics Templates and then select all needed .mogrt files.
- C. Select multiple .mogrt (ties in the Under (macOS) or fiplorer (Windows) and d<ag them Into the Libraries Panel In Premiere Pro.
- D. Select multiple .mogrt files m finder (macOS) or Explorer (Windows) and drag them into the Browse tab of the Essential Graphics panel.
Answer: C
NEW QUESTION 20
You need to send an AAF of an Adobe Premiere Pro Sequence to a Pf oTools sound edilo' using embedded audio tiles with 48 dame handles. After selecting the Sequence and choosing File > Export > AAF. which settings should you choose in the AAF Export Settings dialog?
- A. Check Render Audio Clip Effects, then select Embed Audio Files with Handles and choose Trim Audio Files.
- B. Enable Breakout to Mono, then select Separate Audio and choose Trim Audio Files.
- C. Check Render Audio Clip Effects then select Embed Audio and under Render choose Trim Audio Files,
- D. Enable Breakout to Mono, then select Embed Audio and under Render choose Trim Audio Files.
Answer: D
NEW QUESTION 21
You want to adjust only the color of the sky of a clip m a sequence. Which tool in Adobe Premiere Pro should you use to do this?
- A. In the Lumetri Color Panel, use Hue Saturation Curves.
- B. Change the clip Blend Mode to Multiply.
- C. Apply the Leave Color Effect to the dip.
- D. In the Lumetri Color Panel, use the White Balance Selector.
Answer: D
NEW QUESTION 22
You do not have any graphic dips selected in the timeline, and you want to add a new text item. How do you do this?
- A. In the Essential Graphics panel click the plus icon (+) and choose Text.
- B. In the Graphics menu, choose New Layer > Text.
- C. In the Project panel choose New Item > Text.
- D. In the Essential Graphics panel menu, choose New Text Layer.
Answer: B
NEW QUESTION 23
You want to share your sequence with other editorsso they can continue editing. You are not sure all editors ate using the same version of Adobe Premiere Pro What Type of file should you export?
- A. XML
- B. MXF
- C. ALE
- D. OMF
Answer: B
NEW QUESTION 24
The Media Cache Files in Premiere Pro are by default stored here:
* Mac Users: Macintosh HD/Users/UserName/Library/Application Support/Adobe/Common
* Windows Users: C:Users\UserName\ AppData\Roaming\Adobe\Common
Where can you change this location?
- A. Project Settings > Scratch Disks > Media Cache Files
- B. Sequence > Sequence Settings > Media Cache Files
- C. Project > Project Settings > Media Cache Files
- D. Preferences > Media Cache > Media Cache Files
Answer: B
NEW QUESTION 25
You have a large amount of clips with similar names in a bin. You are searching for a particular visual event.
Out you're not sure which clip or when the event occurs.
Using default settings, how can you quickly preview the contents of the clips without opening them in the Source Monitor?
- A. Set the bin to Icon view. Mold Command (macOS) / Ctrl (Windows) while moving the cursor across clip thumbnails.
- B. Set the bin to Icon view. Move the cursor across clip thumbnails without selecting them. The clip contents will be displayed.
- C. Select all the clips in the bin and drag them into the Media Browser panel. Use playback controls to preview their contents.
- D. Set the bin to Icon view. Select the clip you would line to preview. Move the cursor across the dip thumbnails to see the contents.
Answer: C
NEW QUESTION 26
You are working using the list view in the Project panel and would like to sort clips by date when the original media was created. The needed column is not visible.
How can you make this column visible?
- A. Choose Clip > Metadata Display.
- B. Choose Window > Metadata.
- C. Choose Pile > Project Settings > Metadata.
- D. Right-click on the column header and choose Metadata Display.
Answer: C
NEW QUESTION 27
You shot an interview with two separate cameras, and you notice that the colors of the two cameras do not match. How can you view both clips at the same time to make a comparison?
- A. Choose Sequence > Color Comparison View.
- B. Choose Comparison View in the Program Monitor panel.
- C. Choose Clip > Video Options > Match Frame.
- D. Choose Sequence > Reverse Match frame.
Answer: D
NEW QUESTION 28
You need lo dean up a noisy audio clip that has been edited into a sequence.
What is the most efficient way to send a clip from the Timeline panel in Adobe Premiere Pro to Adobe Audition?
- A. Select the clip in the Timeline panel and choose File > Send to Audition.
- B. Right-click on the clip in the Timeline panel and choose Edit Clip in Audition.
- C. Drag the clip directly from the Timeline panel into the Files panel in Audition.
- D. Select the clip in the Timeline panel and choose File > Export > Send to Audition.
Answer: D
NEW QUESTION 29
You have a sequence m which you have tendered multiple effects, and you want to take advantage of smart rendering to speed up sequence export times. Which preview file format option is required?
- A. Quicktime
- B. H26A
- C. RED R3D
- D. l-frame only MPEG
Answer: C
NEW QUESTION 30
You have exported an .MP4 tile with custom is settings re the H.2M codec but the Me size is too large. Which settings should you choose when exporting again to decrease the file size?
- A. Bitrate Settings > Target Bitrate. set a lower number.
- B. Effects > Video Limiter. set the File Size limit.
- C. Advanced Settings > Key Frame Distance, set to a lower number.
- D. Check Use Maximum Render Quality.
Answer: B
NEW QUESTION 31
You want to create a custom shortcut to give clips on the Timeline a specific label color.
How do you accomplish this?
- A. Open the Keyboard Shortcuts > label Colors. Assign shortcut.
- B. Navigate to Sequence > Clip Label Color. Assign shortcut
- C. Right click a clip on the timeline and select Label Color > Assign Shortcut.
- D. Open the Keyboard Shortcuts. Assign shortcut
Answer: B
NEW QUESTION 32
How can you adjust the brightness of the user interface?
- A. In the Project panel menu, choose Display > Preferences and adjust the Brightness control.
- B. Choose View > Configure > Adjust Brightness and adjust the Brightness control.
- C. Open the Appearance section of the Preferences and adjust the Brightness control.
- D. Open the Control Surface section of the Preferences and adjust the Brightness control.
Answer: D
NEW QUESTION 33
You are performing drag-and-drop editing using the Program monitor drop-zones.
What happens when you drop a video only dip onto the Replace Edit drop zone in the Program monitor, with no clips selected in the sequence?
- A. The clip replaces media at The In point marked in the sequence using In point or media start from the Source clip.
- B. If there is content on the patched tracks at the playhead and an In or an Out point exists In the sequence, the clip replaces media In the sequence.
- C. The clip replaces media in the Timeline using an Overwrite edit, based on duration of In to Out points marked m the Source clip.
- D. If there is a video dip on the patched Hack at the playhead position, the new clip replaces it Otherwise, no edit is performed.
Answer: D
NEW QUESTION 34
You have been given multicamera footage that includes Camera Angle metadata fields.
When creating a Mutt-camera Source Sequence, how can you ensure groups of clips with marching camera angle metadata areautomatically placed on the sametrack?
- A. Select the Create Single Multicam Source Sequence box in the Create Multi-camera Source Sequence dialog. Choose Camera Angle from the drop-flown menu.
- B. Check the box next to Preserve Camera Angle Metadata beneath Sequence Preset dropdown inthe Create Multi-camera Source Sequence dialog box.
- C. Make sure the Camera Angle metadata column b visible in the Project panel. In Sequence Settings, select Camera Angle under Synchronize Point
- D. Select Camera Label from the drop-down menu in the Create Multi-camera Source Sequence dialog.
Choose Automatic for the Sequence Preset.
Answer: A
NEW QUESTION 35
In a sequence, you have several clips with through-edits.
How can you configure Adobe Premiere Pro to highlight these edits?
- A. Select Edit > Preferences > Timeline and check Show Through Edits.
- B. Right-dick any edit point and select Show Through Edits.
- C. Right-dick any instance of the clip and select Show Through Edits.
- D. Click Timeline Display Settings and choose Show Through Edits.
Answer: D
NEW QUESTION 36
A graphic in the Source Monitor seems to have a black background and you are not sure if it has an Alpha channel.
How can you set The Source Monitor to display the graphic contents along with areas of Transparency rather than with a black background?
- A. Open the Source Monitor Settings menu and choose Transparency Grid.
- B. Open the View menu and choose Display Mode > Alpha Channel.
- C. Open the Source Monitor panel menu and choose Show Transparent Pixels.
- D. Right click the Source Monitor and choose Overlays > Alpha.
Answer: A
NEW QUESTION 37
What happens if you drag one sequence into a new sequence with sequence nesting turned off in the Timeline panel?
- A. The original sequence appears in the new sequence as a multicamera source sequence.
- B. You will not be able to edit the original sequence into the new sequence.
- C. The original sequence will edit into the new sequence as a single clip.
- D. Individual clips in the original sequence will be edited into the new sequence.
Answer: C
NEW QUESTION 38
You want to to create an l-cut in the Timeline by trimming only the video or audio of a linked clip. Linked Selection is enabled.
Which modifier key do you hold to Temporarily unlink a clip's picture and sound so you can perform the L-cut edit?
- A. Command - Option (macOS) / Ctrl + Alt (Windows)
- B. Ctrl(macOS)/Alt (Windows)
- C. Option (macOS) / Alt (Windows)
- D. Command (macOS) / Ctrl (Windows)
Answer: A
NEW QUESTION 39
You have winged all the voice over clips in a sequence on a single track.
How can you conveniently adjust the audio level for the sequence voice over clips?
- A. Select all the clips, and adjust the rubber band for any clip that has been selected.
- B. Select all the clips, right-dick any selected dip, and choose Audio > Set Level To.
- C. In the Audio Clip Mixer, adjust the level for the track containing the voice over clips.
- D. In the Audio Track Mixer, adjust the level for the track containing the voice over dips.
Answer: C
NEW QUESTION 40
You have clips containing multiple matching camera angles stacked ina Sequence, but they are not correctly aligned. All clips contain matching reference audio, but the picture and sound are playing out of sync.
How can you realign these clips directly in the timeline?
- A. Select the group of clips that are out of alignment with one another in the Timeline, then go to the Sequence Menu and choose Synchronize. In the dialog box select Audio as the Synchronize Point and press ok.
- B. Select the group of clips that are out of alignment with one another in The Timeline, and from the Sequence tab drop down menu choose Multi-Camera Audio Follows Video.
- C. Select the group of clips that ate out of alignment with one another in the Timeline, right-E tick and choose Synchronize, in the dialog box choose Audio as the Synchronize Point and press ok.
- D. Choose Synchronize in the Timeline panel menu, then choose Audio as the Synchronize Point. From the Track Channel pull-down menu choose Channel 1 or Channel 2 and press ok.
Answer: C
NEW QUESTION 41
......
Get Latest AD0-C102 Dumps Exam Questions in here: https://www.testbraindump.com/AD0-C102-exam-prep.html
