[Dec 04, 2021] Pass Cisco Meraki Solutions Specialist 500-220 Exam With 58 Questions [Q12-Q36]

[Dec 04, 2021] Pass Cisco Meraki Solutions Specialist 500-220 Exam With  58 Questions

Ultimate Guide to Prepare Free Cisco 500-220 Exam Questions & Answer

Cisco 500-220 Exam Syllabus Topics:

Topic	Details
Topic 1	Redundant networks and high availability Explain deployment consideration for the vMX
Topic 2	Design stable, secure, and scalable routing deployments Explain Cisco Meraki cloud architecture
Topic 3	Compare endpoint device and application management methods Design dynamic path selection policies
Topic 4	Device enrollment such as supervised and device owner Interpret information from monitoring and reporting tools
Topic 5	Wireless client connectivity issues using Dashboard Network access control solutions
Topic 6	Sentry for Meraki managed deployments Design scalable Meraki Auto VPN architectures
Topic 7	Alerts with Dashboard, SNMP, Syslog and Netflow in Dashboard Security threats using Security Center
Topic 8	Application performance issues using Meraki Insight Describe how to use the dashboard API to monitor and maintain networks
Topic 9	Design Enterprise wireless services Configuring MR wireless access points
Topic 10	Threat protection and content filtering rules Explain access methods to dashboard and devices
Topic 11	SSIDs for Enterprise and BYOD deployments Cisco Meraki Cloud Management
Topic 12	Explain organizational structure, segmentation and permissions Explain licensing, co-termination, and renewals
Topic 13	Troubleshooting Enterprise networks Compare deployment workflows

 

NEW QUESTION 12
Which information is used to calculate whether a WAN link has high usage?

• A. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
• B. total historical throughput of an uplink
• C. data under Security & SD WAN > Appliance Status > Uplink > Live Data
• D. total number of devices that are actively passing traffic

Answer: A

 

NEW QUESTION 13
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

• A. MS Switch
• B. MV Smart Camera
• C. Meraki Insight
• D. MR Access Point

Answer: D

 

NEW QUESTION 14
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.

Answer:

Explanation:

 

NEW QUESTION 15
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

 

NEW QUESTION 16
Refer to the exhibit.

This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?

• A. All APs stop functioning in 30 days.
• B. One AP Immediately stops functioning.
• C. All APs immediately stop functioning.
• D. All network devices stop functioning in 30 days.

Answer: D

 

NEW QUESTION 17
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)

• A. enabling motion-based retention
• B. enabling audio compression
• C. installing an SSD memory extension
• D. configuring a recording schedule
• E. enabling maximum retention limit

Answer: A,D

 

NEW QUESTION 18
Which information do the MXs in a High Availability pair share?

• A. time synchronization state
• B. stateful firewall database
• C. DHCP association database
• D. spanning-tree state

Answer: D

 

NEW QUESTION 19
Refer to the exhibit.

What are two outcomes reflected in the Web App Health application? (Choose two.)

• A. Network #1 could not load Google because of a remote server issue.
• B. Network #2 could not load Google because of a local client misconfiguration.
• C. Network #2 had better application performance than Network #1.
• D. Neither network recorded any server-side performance issues.
• E. Users on both networks may be experiencing issues when attempting to reach Google.

Answer: A,D

 

NEW QUESTION 20
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)

• A. ADD
• B. POST
• C. PUT
• D. GET
• E. SET
• F. PATCH

Answer: B,C,D

Explanation:
Reference:
Cisco_Meraki_Dashboard_API

 

NEW QUESTION 21
Refer to the exhibit.

A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?

• A. The packet is stopped.
• B. Not enough detail is available to determine the next hop.
• C. The Auto VPN peer "Store 1532 - appliance" is the next hop.
• D. The concentrator gateway (10.128.124.62) is the next hop.

Answer: B

 

NEW QUESTION 22
Refer to the exhibit.

Which IDS/IPS mode is the MX Security Appliance configured for?

• A. quarantine
• B. prevention
• C. detection
• D. blocking

Answer: B

 

NEW QUESTION 23
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?

• A. starts on the primary MX appliance and then occurs on the secondary MX appliance
• B. starts on both MX appliances at the same time and then immediately reboots both appliances
• C. starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
• D. starts on the secondary MX appliance and then occurs on the primary MX appliance

Answer: A

 

NEW QUESTION 24
Refer to the exhibit.

The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?

• A. Remove the connection from Internet 1.
• B. Physically disconnect all LAN ports.
• C. Add a deny any/any firewall rule to the end of the firewall rules.
• D. Configure the MX appliance to Routed mode on the Addressing & VLANS page.

Answer: B

 

NEW QUESTION 25
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)

• A. Simultaneous logins
• B. RADIUS for splash page settings
• C. Captive Portal strength
• D. Firewall & traffic shaping
• E. Controller disconnection behavior

Answer: C,E

 

NEW QUESTION 26
Which API endpoint clones a new Organization?

• A. PUT /organizations/{organizationId}/clone
• B. POST /organizations/clone/{organizationId}
• C. POST /organizations/{organizationId}/new
• D. POST /organizations/{organizationId}/clone

Answer: C

 

NEW QUESTION 27
What are two organization permission types? (Choose two.)

• A. Read-only
• B. Monitor-only
• C. Full
• D. Write-only
• E. Write

Answer: A,C

Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions

 

NEW QUESTION 28
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)

• A. Maximum Latency
• B. Application Response Time
• C. Per-flow Goodput
• D. Total Bandwidth Usage
• E. Maximum Jitter

Answer: B,C

 

NEW QUESTION 29
Refer to the exhibit.

What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

• A. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
• B. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
• C. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
• D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

Answer: D

 

NEW QUESTION 30
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.

Answer:

Explanation:

 

NEW QUESTION 31
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?

• A. malware protection
• B. intrusion prevention
• C. SD-WAN
• D. next-generation firewall

Answer: D

 

NEW QUESTION 32
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)

• A. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
• B. Peers contact the VPN registry at TCP port 9350.
• C. For IPsec tunneling, peers use UDP ports 500 and 4500.
• D. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
• E. Peers contact the VPN registry at UDP port 9350.

Answer: A,E

Explanation:
Reference:
_Configuration_and_Troubleshooting

 

NEW QUESTION 33
Refer to the exhibit.

What are the Loss and Average Latency statistics based on?

• A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
• B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
• C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
• D. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page

Answer: B

 

NEW QUESTION 34
Refer to the exhibit.

Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)

• A. Set the speed of the cellular uplink to zero.
• B. Enable load balancing.
• C. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
• D. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
• E. Change the primary uplink to "none".

Answer: B,C

 

NEW QUESTION 35
......

Engineering Cisco Meraki Solutions Practice Tests 2021 | Pass 500-220 with confidence!: https://drive.google.com/open?id=1Tm28UNKyXRCf6b5d9x1kwNHWfsvj5-Cf

Pass 500-220 Tests Engine pdf - All Free Dumps: https://www.testbraindump.com/500-220-exam-prep.html