Get HP HPE0-S60 Dumps Questions [2023] To Gain Brilliant Result
HPE0-S60 dumps - TestBraindump - 100% Passing Guarantee
NEW QUESTION # 49
Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.
Answer:
Explanation:
NEW QUESTION # 50
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?
- A. If properly cabled, any compute node can access any HPE D3490 storage module
- B. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
- C. To manage 15 frames, additional HPE Composers are required.
- D. The customer must create at least five logical enclosures for this setup.
Answer: D
NEW QUESTION # 51
What is one of me benefits of using HPE Composer 2?
- A. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- B. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
- C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- D. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
Answer: C
NEW QUESTION # 52
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the ILO Advanced license is properly applied
- B. At HPE OneView Interface to verify whether the server is In the maintenance mode
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
Answer: A
NEW QUESTION # 53
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
NEW QUESTION # 54
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE ProLiant DL380 Gen 10 Plus
- B. HPE ProLiant DL560 Gen10
- C. HPE Synergy 480 Gen10 Plus
- D. HPE Superdome Flex 280
Answer: A
NEW QUESTION # 55
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2 Why would you recommend this change?
- A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
- B. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
- C. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
- D. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
Answer: A
NEW QUESTION # 56
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 57
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
1 - Add vCenter Server to HPE OneView for VMware vCenter Server.
2 - Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
3 - Upload HPE-friendly ESXi image.
4 - Deploy new ESXi systems using vCenter Server interface.
NEW QUESTION # 58
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
NEW QUESTION # 59
Put the steps of the HPE infosight flow in the correct order.
Answer:
Explanation:
1 - Observing
2 - Learning
3 - Predicting
4 - Recommending
5 - Acting
NEW QUESTION # 60
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
Answer:
Explanation:
NEW QUESTION # 61
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
NEW QUESTION # 62
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?
- A. Each interconnect module in each fabric must be properly licensed in HPE OneView
- B. Interconnect modules that provide SAS connectivity should be moved to the third fabric
- C. Each compute node must have at least 768GB of memory installed
- D. Compute nodes must have a second CPU installed to access the second fabric.
Answer: C
NEW QUESTION # 63
What is a limitation when creating a server profile?
- A. Administrator cannot define more than 8 connections within a server profile
- B. It is not possible to create shared volumes on demand through a server profile
- C. BIOS settings can be changed only when UEFI optimized is selected as boot mode
- D. ILO management is limited to the integration with Active Directory or LDAP
Answer: D
NEW QUESTION # 64
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
- B. HPE virtual Connect SE 32 Gb FC Module for Synergy
- C. HPE Synergy 12 Gb SAS Connection Module
- D. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
Answer: A
NEW QUESTION # 65
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 66
Which statement about manual orchestration during the firmware update is true?
- A. It provides the ability to install an older firmware version than currently Installed In the interconnect
- B. It allows all the interconnect modules to be activated manually at the same time.
- C. It is supported only for logical enclosures with at least three frames
- D. It provides an ability to select and update one side of the Interconnect topology at a time
Answer: D
NEW QUESTION # 67
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Flex supports HPE Persistent Memory
- B. Only HPE Superdome Flex 280 can support multiple nPars
- C. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- D. Only HPE Superdome Rex 280 can be managed using HPE OneView
Answer: D
NEW QUESTION # 68
Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased 50 HPE.
ProLiant DK385 Gen10 Plus v2. They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?
- A. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.
- B. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
- C. connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.
- D. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
Answer: A
NEW QUESTION # 69
......
Get 100% Passing Success With True HPE0-S60 Exam: https://www.testbraindump.com/HPE0-S60-exam-prep.html
Premium Quality HP HPE0-S60 Online dumps: https://drive.google.com/open?id=1gzkkVUy0g2USzwl15fFkWbw23bBhGLMy
