Get ready to pass the 300-710 Exam right now using our CCNP Security Exam Package
A fully updated 2021 300-710 Exam Dumps exam guide from training expert TestBraindump
How to Prepare For Securing Networks with Cisco Firepower (300-710 SNCF) Exam
Preparation Guide for Securing Networks with Cisco Firepower (300-710 SNCF) Exam
Introduction
Cisco Systems , Inc., located in San Jose , California, in the heart of Silicon Valley, is an American multinational technology corporation. Cisco designs , produces and sells hardware , software, telecommunications equipment and other high-tech services and products for networking. Cisco specialises in unique tech markets, such as the Internet of Things (IoT), domain security and energy management, through its various acquired subsidiaries, such as OpenDNS, Webex, Jabber and Jasper.
A world of opportunity is being created by Cisco technology. With Cisco’s Training and Certifications, one can power their career with a new learning portfolio that opens opportunities for developers as well as network engineers. A direct path to your technology career ambitions is provided by Cisco’s training and certification program. IT technologies are driving the transformation of Cisco’s training and qualification programs to prepare teachers, engineers, and developers of software for success in the most important positions in the industry.
Explore the power of the dynamic culture of the Cisco Learning Network to jump-start your certification and lifelong learning goals. Get useful tools for IT training for all Cisco certifications. Access research tools for IT certification, CCNA practise exams, IT wages and finding IT work.
This exam guide is intended to help you determine if you are able to complete the Securing Networks with Cisco Firepower (300-710 SNCF) exam successfully. This guide includes information on the certification test target audience, recommended preparation and documentation, and a full list of exam targets, all with the intention of helping you obtain a passing grade. In order to increase your chances of passing the test, Salesforce strongly recommends a mix of on-the-job experience, course attendance, and self-study.
Who should take the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of Cisco Firepower Threat Defence, including policy configurations, integrations, deployments, management and troubleshooting, are highly recommended to take this exam and get themselves certified from Cisco.
List of target audience for this exam:
- Security consultants
- System engineers
- Security administrators
- Channel partners and resellers
- Network administrators
- Technical support personnel
- Cisco integrators and partners
NEW QUESTION 71
Which command must be run to generate troubleshooting files on an FTD?
- A. system generate-troubleshoot all
- B. sudo sf_troubleshoot.pl
- C. system support view-files
- D. show tech-support
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html
NEW QUESTION 72
IT management is asking the network engineer to provide high-level summary statistics of the Cisco FTD appliance in the network. The business is approaching a peak season so the need to maintain business uptime is high. Which report type should be used to gather this information?
- A. Risk Report
- B. Malware Report
- C. SNMP Report
- D. Standard Report
Answer: D
NEW QUESTION 73
An engineer has been tasked with using Cisco FMC to determine if files being sent through the network are malware. Which two configuration tasks must be performed to achieve this file lookup? (Choose two.)
- A. The Cisco FMC needs to connect to the Cisco ThreatGrid service directly for sandboxing.
- B. The Cisco FMC needs to include a SSL decryption policy.
- C. The Cisco FMC needs to connect with the FireAMP Cloud.
- D. The Cisco FMC needs to include a file inspection policy for malware lookup.
- E. The Cisco FMC needs to connect to the Cisco AMP for Endpoints service.
Answer: A,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Reference_a_wrapper_Chapter_topic_here.html#ID-2193-00000296
NEW QUESTION 74
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?
- A. configure high-availability resume
- B. system support network-options
- C. configure high-availability disable
- D. configure high-availability suspend
Answer: C
NEW QUESTION 75
Within Cisco Firepower Management Center, where does a user add or modify widgets?
- A. reporting
- B. dashboard
- C. summary tool
- D. context explorer
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Using_Dashboards.html
NEW QUESTION 76
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /etc/sf/DCEALERT.MIB
- B. /sf/etc/DCEALERT.MIB
- C. /etc/sf/DCMIB.ALERT
- D. system/etc/DCEALERT.MIB
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-External-Responses.pdf
NEW QUESTION 77
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv4 in transparent firewall mode
- B. BGPv6
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. ECMP with up to three equal cost paths across a single interface
- E. BGPv4 with nonstop forwarding
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config- guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION 78
An administrator is creating interface objects to better segment their network but is having trouble adding interfaces to the objects. What is the reason for this failure?
- A. The administrator is adding an interface that is in multiple zones.
- B. The interfaces are being used for NAT for multiple networks.
- C. The interfaces belong to multiple interface groups.
- D. The administrator is adding interfaces of multiple types.
Answer: C
NEW QUESTION 79
Which action should be taken after editing an object that is used inside an access control policy?
- A. Create another rule using a different object name.
- B. Redeploy the updated configuration.
- C. Delete the existing object in use.
- D. Refresh the Cisco FMC GUI for the access control policy.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/reusable_objects.html
NEW QUESTION 80
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
- A. transparent inline mode
- B. propagate link state
- C. strict TCP enforcement
- D. TAP mode
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION 81
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. subinterface
- B. bridge virtual
- C. switch virtual
- D. bridge group member
Answer: D
NEW QUESTION 82
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv4 in transparent firewall mode
- B. BGPv6
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. ECMP with up to three equal cost paths across a single interface
- E. BGPv4 with nonstop forwarding
Answer: B,D
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config- guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION 83
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?
- A. configure high-availability resume
- B. system support network-options
- C. configure high-availability disable
- D. configure high-availability suspend
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 84
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
- B. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- C. They can block traffic based on Security Intelligence data.
- D. File policies use an associated variable set to perform intrusion prevention.
- E. The system performs intrusion inspection followed by file inspection.
Answer: B,C
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Access_Control_Using_Intrusion_and_File_Policies.html
NEW QUESTION 85
An organization has seen a lot of traffic congestion on their links going out to the internet There is a Cisco Firepower device that processes all of the traffic going to the internet prior to leaving the enterprise. How is the congestion alleviated so that legitimate business traffic reaches the destination?
- A. Create a QoS policy rate-limiting high bandwidth applications
- B. Create a VPN policy so that direct tunnels are established to the business applications
- C. Create a flexconfig policy to use WCCP for application aware bandwidth limiting
- D. Create a NAT policy so that the Cisco Firepower device does not have to translate as many addresses
Answer: A
NEW QUESTION 86
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?
- A. ISEGrid
- B. FTD RTC
- C. pxGrid
- D. FMC RTC
Answer: C
Explanation:
Section: Integration
NEW QUESTION 87
What are the minimum requirements to deploy a managed device inline?
- A. passive interface, MTU, and mode
- B. inline interfaces, MTU, and mode
- C. inline interfaces, security zones, MTU, and mode
- D. passive interface, security zone, MTU, and mode
Answer: B
NEW QUESTION 88
An engineer has been asked to show application usages automatically on a monthly basis and send the information to management What mechanism should be used to accomplish this task?
- A. dashboards
- B. event viewer
- C. reports
- D. context explorer
Answer: C
NEW QUESTION 89
An administrator is attempting to remotely log into a switch in the data centre using SSH and is unable to connect. How does the administrator confirm that traffic is reaching the firewall?
- A. by attempting to access it from a different workstation.
- B. by performing a packet capture on the firewall.
- C. by running a packet tracer on the firewall.
- D. by running Wireshark on the administrator's PC
Answer: B
NEW QUESTION 90
With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?
- A. IPS-only
- B. firewall
- C. tap
- D. ERSPAN
Answer: D
Explanation:
Reference:
v64/interface_overview_for_firepower_threat_defense.html
NEW QUESTION 91
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv4 in transparent firewall mode
- B. BGPv6
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. ECMP with up to three equal cost paths across a single interface
- E. BGPv4 with nonstop forwarding
Answer: B,D
NEW QUESTION 92
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be the same model.
- B. The units must be different models if they are part of the same series.
- C. The units must be configured only for firewall routed mode.
- D. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- E. The units must be the same version
Answer: A,E
NEW QUESTION 93
A network administrator needs to create a policy on Cisco Firepower to fast-path traffic to avoid Layer 7 inspection. The rate at which traffic is inspected must be optimized. What must be done to achieve this goal?
- A. Configure a prefilter policy.
- B. Disable TCP inspection.
- C. Enable lhe FXOS for multi-instance.
- D. Configure modular policy framework.
Answer: A
NEW QUESTION 94
Which Cisco Firepower feature is used to reduce the number of events received in a period of time?
- A. correlation
- B. rate-limiting
- C. suspending
- D. thresholding
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-Global-Threshold.html
NEW QUESTION 95
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?
- A. system support platform
- B. system support dump-table
- C. system support ssl-debug
- D. system support firewall-engine-debug
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212330-firepower-management-center-display-acc.html
NEW QUESTION 96
......
Master 2021 Latest The Questions CCNP Security and Pass 300-710 Real Exam!: https://www.testbraindump.com/300-710-exam-prep.html
Practice To 300-710 - TestBraindump Remarkable Practice On your Securing Networks with Cisco Firepower Exam: https://drive.google.com/open?id=1zrT972Z8jn37uF5RzN8SPc4NUTANDJHH
