Get ready to pass the 350-801 Exam right now using our CCNP Collaboration Exam Package
A fully updated 2026 350-801 Exam Dumps exam guide from training expert TestBraindump
Cisco 350-801 exam is challenging and requires extensive preparation. The candidates are recommended to have practical experience in implementing and operating Cisco collaboration solutions before taking the exam. The candidates can prepare for the exam by taking instructor-led or self-paced training courses offered by Cisco, reading Cisco documentation, or using practice exams and study materials available online.
The Cisco CLCOR 350-801 exam is necessary to achieve the Cisco Certified Specialist – Collaboration Core certification among two other prestigious certificates. Particularly, this test validates the examinee's skills in working with complex collaboration features and providing effective solutions to their problems.
NEW QUESTION # 70
Which two actions must be taken to provision a new device using self-provisioning?
- A. Ensure the user has a directory URI and a primary extension.
- B. Link the appropriate universal device template to the user profile.
- C. Link the appropriate service profile to the provisioning template.
- D. Enable the self-provisioning IVR in the Cisco UCM
- E. Import the user profile to the corporate LDAP directory.
Answer: B,D
Explanation:
Self-Provisioning of a phone to a user needs:
* an End user with a primary extension and a Feature Group Template
* the Feature Group Template needs a User Profile
* the User Profile needs a Universal Line and Universal Device Template Finally to activate it you need a CTI route point and a configured IVR service to actually register it.
HOWEVER, it looks like you dont actually NEED the IVR to technically fullfil the goal of self- registration, as users can use the URL based registration. but i am not 100% sure if you wont need the IVR anyways, even if you arent using it - the guide is not 100% clear on that
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/214228-configure-self-provisioning-feature-on-c.html
NEW QUESTION # 71
Refer to the Exhibit.
Which command is required to allow this media resource to handle Video Media streams?
- A. video codec h264
- B. codec pass-through
- C. maximum sessions hardware 50
- D. associate application Cisco unified border element
Answer: B
NEW QUESTION # 72
The chief officer at a company must reduce collaboration infrastructure costs by onbording all on-permises equipment to the cloud by using CISCO Webex Control Hub. Administrators need the ability to manage upgrades and set up hot desking for on-premises devices.
Which action must be taken before on boardng devices by using the Control Hub?
- A. Upgrade all the devices to software version CE9.15 or later
- B. Allow HTTP traffic from each device to Control Hub.
- C. Configure tie Control Hub organization ID on the devices
- D. Acquire a license for each device.
Answer: A
Explanation:
This is a prerequisite for using the Device Connector tool, which allows you to onboard and register several devices simultaneously to the Webex Control Hub1. The Device Connector tool creates a workspace, an activation code, and activates all of your devices in one go1. This way you don't need to be physically present in the same room to activate the devices.
The other options are not required before onboarding devices by using the Control Hub:
* Configuring the Control Hub organization ID on the devices is not necessary, as the Device Connector tool will send the device information to your Webex organization and generate activation codes for them
1.
* Acquiring a license for each device is not necessary, as you can assign licenses to users and devices after they are registered to the Webex Control Hub2.
* Allowing HTTP traffic from each device to Control Hub is not necessary, as HTTPS connectivity is required for the Device Connector tool to communicate with the devices1.
NEW QUESTION # 73
An administrator uses the Cisco Unified Real-Time Monitoring Tool to investigate recent calls on a Cisco UCM cluster. The SIP trace for an on-net. direct-media call shows two 180 Ringing and two 11 BYE messages. Why are there multiples of each message type in the trace?
- A. The source phone sends a 180 Ringing signal to the Cisco UCM, which sends a 180 Ringing signal to the destination phone. The same process applies to 11 BYE messages.
- B. The source phone must signal to the destination phone that it is ringing, and the destination phone signals back with a 180 Ringing message. The same process applies to 11 BYE messages.
- C. The calls have an MTP in the call path due to different codec support. The calls are subsequently split into two call legs.
- D. The destination phone signals back to the Cisco UCM that it is ringing, and the Cisco UCM signals back to the source phone.
Answer: D
Explanation:
The ringing message actually comes from the destination phone and not from the source one.
https://community.cisco.com/t5/collaboration-voice-and-video/taking-sip-call-trace-on-cisco- unified-cm-using-rtmt/ta-p/3161200
NEW QUESTION # 74
A Cisco Unity Connection administrator configures LDAP integration and performs a full LDAP sync. The administrator must add all users with mailboxes from the LDAP directory to Unity Connection. What must the administrator do in Cisco Unity Connection Administration?
- A. From Users, select Synch Users, set Find Imported Users In to LDAP Directory, and then click Find.
- B. From Users, select Users, select New Users, and then click Import from LDAP.
- C. From Users, select Import Users, set Find End Users In to LDAP Directory, and the click Find.
- D. From LDAP, select LDAP Directory Configuration, and then click Perform Full Sync Now.
Answer: C
Explanation:
In Cisco Unity Connection, after performing an LDAP sync, the next step to import users with mailboxes is to manually import them from the LDAP directory into Unity Connection.
The correct process is to navigate to Users > Import Users, then select Find End Users In:
LDAP Directory, and click Find.
This action lists all LDAP-synced users, allowing the administrator to select users for import into Unity Connection.
Once imported, these users can have voicemail accounts provisioned and managed within Unity Connection.
NEW QUESTION # 75
Drag and drop the SNMPv3 messages types from the left onto the corresponding definitions on the right.
Answer:
Explanation:
NEW QUESTION # 76
An incoming off-net call to a user fails. An engineer notices that the off-net call is G.711, but the phone accepts only G.729. Which media resource on a Cisco Unified Border Element and Cisco Unified Communications Manager must the engineer configure to manage the codec negotiation?
- A. CFB
- B. transcoder
- C. MTP
- D. MOH
Answer: B
Explanation:
Explanation
NEW QUESTION # 77
Refer to the exhibit.
An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device (config)# mgcp
- B. Device (config) # com-manager active
- C. Device(config)# ccm-manager enable
- D. Device(config)# mgcp enable
Answer: A
NEW QUESTION # 78
An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager.
Which phone type must be selected?
- A. Cisco Unified Client services Framework
- B. Cisco Dual mode for Android
- C. Cisco Dual Mode for iPhone
- D. third-party SIP device
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_D00D8CBD_00_d eployment-installation-guide-cisco-jabber115/CJAB_BK_D00D8CBD_00_deployment-installation- guide-cisco-jabber115_chapter_01000.html
NEW QUESTION # 79
What is the purpose of a hybrid Local Gateway?
- A. to handle calls between Cisco UCM and Webex Calling
- B. to handle calls between the Public Switched Telephone Network and Webex Calling
- C. to handle calls between Webex Calling and Cisco Calling Plans
- D. to handle calls between Webex Calling and Cloud Connected PSTN
Answer: B
NEW QUESTION # 80
An engineer must configure codec on a Cisco Unified Border Element to prefer the G.711 ulaw and use G.711 codec as the next The engineer logs In to the CUBE, enters the dial.peer configuration level, and runs the voice-class codec 100 command. Which set of commands completes the configuration?
- A. voice class codec 11j codec <?7iiulaw preferred codec g7iialaw
- B. voice class codec 100 codec g7llalaw preference 1 codec a7Hulaw preference 2
- C. vice class codec 100
codec preference 1 g7llulaw
codec preference 2 o711alaw - D. voice class codec ::: codec g711ulaw g711alaw
Answer: C
Explanation:
The following commands are used to configure the codec on a Cisco Unified Border Element to prefer the G.
711 ulaw and use G.711 alaw as the next codec:
Code snippet
voice class codec 100
codec preference 1 g711ulaw
codec preference 2 g711alaw
The voice class codec 100 command creates a new voice class with the ID of 100. The codec preference 1 g711ulaw command sets the preference for the G.711 ulaw codec to 1. The codec preference 2 g711alaw command sets the preference for the G.711 alaw codec to 2.
NEW QUESTION # 81
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology? (Choose two.)
- A. device pool
- B. Audio Codec Preference List
- C. RSVP-enabled locations
- D. physical location
- E. location-based CAC
Answer: A,E
NEW QUESTION # 82
An engineer must configure a route pattern that can route all +E.164 globalized international numbers for the plans of all countries. Which Cisco UCM configuration accomplish this task?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 83
Refer to the exhibit. When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?
- A. IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)
- B. SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)
- C. SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)
- D. SIP TLS (A) +SIP TLS (B) +SIP TLS (C)
Answer: C
NEW QUESTION # 84
After an administrator installs the Cisco jabber Client, it fails to register with the cisco UCM server. Which two actions should be taken to troubleshoot this problem? (Choose two.)
- A. Reboot the Cisco Unified Border Element Gateway.
- B. Verify the configuration of the DNS SRV record.
- C. Verify corporate firewall settings for client connections.
- D. Verify Layer 3 connectivity on the gateway.
- E. Verify the installation of the LMHOST file on the PC
Answer: B,C
NEW QUESTION # 85
Which transport protocol does the application layer protocol SNMP use?
- A. XML
- B. UDP
- C. SIP
- D. HTTP
Answer: B
Explanation:
Explanation/Reference: https://www.geeksforgeeks.org/simple-network-management-protocol-snmp/
NEW QUESTION # 86
A customer wants a video conference with five Cisco TelePresence IX5000 series system. Which media resource is necessary in the design to fully utilize the immersive functions?
- A. Cisco PVDM4-128
- B. Cisco Webex meetings server
- C. Software conference bridge on Cisco Unified Communications Manager
- D. Cisco meeting server
Answer: D
NEW QUESTION # 87
Which statement about Cisco Unified Communications Manager and Cisco IM and Presence backups is true?
- A. Backups should be scheduled during off-peak hours to avoid system performance issues.
- B. Backups are saved as unencrypled.tar files.
- C. Backups are saved as .tar files and encrypted using the web administrator account.
- D. Backups are not needed for subscriber Cisco Unified Communications Manager and Cisco IM and Presence servers.
Answer: A
NEW QUESTION # 88
Refer to the exhibit.
Which Codec is negotiated?
- A. ILBC
- B. 711ulaw
- C. 0
- D. 1
Answer: B
NEW QUESTION # 89
Refer to the exhibit.
An administrator configures a secure SIP trunk on Cisco UCM.
Which value is needed in the secure certificate subject or subject alternate name field to accomplish this task?
- A. The common name of the remote device certificates.
- B. The fully qualified domain name of the remote device that is configured on the SIP trunk.
- C. The common name of the Cisco UCM CallManager certificate.
- D. The full qualified domain name of all Cisco UCM nodes that run the CallManager service.
Answer: B
NEW QUESTION # 90 
Refer to tho exhibit. A customer reports that SIP voice calls are using G.711 codec instead of G.729. The administrator checks the SIP signaling in the logs and sees the SDP shown. What will the administrator see in the logs if the right configuration change was made to resolve the issue?
- A. m=audio 16444 RTP/AVP 18 101
- B. m=audio 16444 RTP/AVP 9 101
- C. m=audio 16444 RTP/AVP 15 101
- D. m=audio 16444 RTP/AVP 4 101
Answer: A
NEW QUESTION # 91
What is a capability of the call forwarding feature in a Cisco Webex dial plan?
- A. ringtone selection
- B. business continuity
- C. device pool selection
- D. Call Admission Control
Answer: B
Explanation:
Call forwarding is a feature that allows users to forward incoming calls to another number. This can be useful in a number of situations, such as when a user is not available to take a call, or when a user wants to forward calls to a different number during certain times of the day.
Call forwarding can be used to improve business continuity by ensuring that calls are always answered, even if the user is not available. For example, if a user is out of the office, they can forward their calls to their voicemail or to another employee. This ensures that customers and clients can always reach someone, even if the user is not available.
NEW QUESTION # 92
What is the traffic classification for voice and video conferencing?
- A. Voice and video conferencing are both classified is CoS 3.
- B. Voice is classified as CoS 5, and video conferencing is CoS 4.
- C. Video conferencing is classified as CoS 1, and voice is CoS 2.
- D. Voice is classified as CoS 4, and video conferencing is CoS 5.
Answer: A
NEW QUESTION # 93
Which service on the Presence Server is responsible for maintaining the point-to-point chat connections between Jabber clients?
- A. Cisco XCP XMPP Federation Manager
- B. Cisco SIP Proxy
- C. Cisco XCP Text Conference Manager
- D. Cisco XCP Router
Answer: D
Explanation:
XCP Router in both types of chat
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_
5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config- admin-guide-imp-105_chapter_00.html XCP Text Conference Manager only in external DB which is for persistent chat which is only applicable for group chat
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/11_
5_1/cup0_b_config-and-admin-guide-1151su5/cup0_b_imp-system-configuration-
1151su5_chapter_010000.html#task_2BA3E8B8D67B3AA5E200B9703818BB39
NEW QUESTION # 94
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls Which configuration is needed to accomplish this task?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: B
NEW QUESTION # 95
......
Master 2026 Latest The Questions CCNP Collaboration and Pass 350-801 Real Exam!: https://www.testbraindump.com/350-801-exam-prep.html
Practice To 350-801 - TestBraindump Remarkable Practice On your Implementing and Operating Cisco Collaboration Core Technologies Exam: https://drive.google.com/open?id=1N2dvvOuQNic9AaLobtQAGbz6ZFALmZC4
