Real JN0-1362 are Uploaded by TestBraindump provide 2021 Latest JN0-1362 Practice Tests Dumps.
All JN0-1362 Dumps and Service Provider Design, Specialist (JNCDS-SP) Training Courses Help candidates to study and pass the Service Provider Design, Specialist (JNCDS-SP) Exams hassle-free!
NEW QUESTION 39
You want to implement Source Packet Routing in Networking (SPRING) in your network core using MPLS as the data plane for traffic engineering purposes.
In this scenario what are two protocols that would be used to distribute the segment IDs? (Choose two )
- A. LDP
- B. IS-IS
- C. RSVP
- D. OSPF
Answer: B,D
NEW QUESTION 40
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on stateful flow information.
- B. FlowSpec can block traffic based on the source address.
- C. FlowSpec requires Jflow implementation and licensing.
- D. FlowSpec can block traffic based on the destination address.
Answer: B,D
NEW QUESTION 41
You are designing a solution for an energy trading organization that allows them to stream natural gas prices to trading partners. Prices will be streamed to trading partners using the Internet. Trading regulations require that any trading data streamed over a public network must be encrypted and authenticated.
Which connectivity solution meets these requirements?
- A. VPLS
- B. L3VPN
- C. L2VPN
- D. IPsec
Answer: D
NEW QUESTION 42
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology.
Which protocol is recommended for this purpose?
- A. ISIS
- B. BGP-LS
- C. OSPF
- D. PIM-SSM
Answer: B
NEW QUESTION 43
Exhibit.
Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)
- A. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
- B. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
- C. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
- D. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
Answer: A,D
NEW QUESTION 44
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?
- A. MP-BGP
- B. MPLS
- C. VXLAN
- D. EVPN
Answer: C
NEW QUESTION 45
Which statement is correct regarding classifiers in CoS?
- A. Classifiers are used to define the transmit rate for forwarding classes.
- B. Classifiers are used to change DiffServ values on outgoing packets.
- C. Classifiers are used to separate traffic into different forwarding classes.
- D. Classifiers are used to route traffic between routing instances.
Answer: C
NEW QUESTION 46
Which Juniper Networks platform automates the orchestration of compute, storage, and networking resources to create and manipulate OpenStack clouds?
- A. NorthStar
- B. RingMaster
- C. Contrail
- D. WANDL
Answer: C
NEW QUESTION 47
Your customer wants an MPLS-based L3VPN service between multiple remote locations.
Which two statements are true regarding the customer's WAN edge devices? (Choose two )
- A. They must have EBGP configured.
- B. They require IP connectivity with the PEs.
- C. They require routes for all remote sites.
- D. They must have MPLS configured.
Answer: B,C
NEW QUESTION 48
Exhibit.
Referring to the exhibit which type of IPsec VPN should be used to create the desired topology?
- A. AutoVPN
- B. hub-and-spoke VPN
- C. fully meshed VPN
- D. Group VPN
Answer: D
NEW QUESTION 49
MPLS services are being delivered from provider edge (PE) routers Each PE is connected to multiple customer edge (CE) routers.
What should you use on the PE to isolate customer routes?
- A. VPN routing and forwarding tables
- B. external BGP
- C. port access control lists
- D. access control lists
Answer: A
NEW QUESTION 50
Your client asked you to design a solution with the requirements shown below.
- Have better traffic engineering for applications across an existing MPLS core.
- Support both IPv4 and IPv6 traffic
- Work with an MX Series core.
- Work with a North Star Controller
- Work with existing IGP (ISIS)
Which feature would you recommend be implemented in this solution?
- A. CoS-based forwarding
- B. zero touch provisioning
- C. opaque area LSAs
- D. segment routing
Answer: D
NEW QUESTION 51
You are asked to improve the convergence time in your large enterprise WAN Each branch office network is multihomed to two central aggregation points using BGP.
Which action would satisfy the requirement?
- A. Provision more WAN bandwidth.
- B. Increase interface hold timers.
- C. Use Bidirectional Forwarding Detection.
- D. Decrease interface hold timers.
Answer: C
NEW QUESTION 52
Click the Exhibit button
Referring to the network design shown in the exhibit, you must ensure that VPN data between Site1 and Site2 will be earned over a single end-to-end LSP.
How would you advertise PE1's loopback address to accomplish this task?
- A. over a single EBGP session (IPv4 unicast NLRI) between PE1/PE4
- B. over BGP-LU sessions between the PE1/B1. B1/B2 and B2/PE4
- C. over a single MP-IBGP session (L3VPN NLRI) between PE1/PE4
- D. over a single IBGP session (IPv4 unicast NLRI) between PE VPE4
Answer: B
NEW QUESTION 53
Your team manages a WAN consisting of multiple customer MPLS tunnels. You are asked to design an SDN WAN solution capable of signaling LSPs to avoid nodes or links before they are removed from the network for service.
Which Juniper Network's SDN WAN solution satisfies these requirements?
- A. NorthStar Planner Failure Simulation
- B. NorthStar Planner Path Design
- C. NorthStar Controller Maintenance Mode
- D. NorthStar Controller Bandwidth Calendaring
Answer: B
NEW QUESTION 54
You work for a service provider and are designing an L3VPN with Internet access solution for a customer using Provider Independent (PI) IPv6 space.
Which networking designs will work for this customer?
- A. Use NAT64 to convert PI space to your public IPv6 space set up 6VPE routing instances on your PE routers for the customer
- B. Use NAT66 to convert PI space to your public IPv6 space set up 6PE on your PE routers to transport IPv6 traffic natively.
- C. Use NAT64 to convert PI space to IPv4 internet addresses, set up 6VPE routing instances on your PE routers for the customer.
- D. Use NAT64 to convert PI space to IPv4 Internet addresses set up 6PE on your PE routers to transport IPv4 traffic natively.
Answer: C
NEW QUESTION 55
Exhibit.
Referring to the exhibit which statement is true about the connectivity between service provider A and B regarding the customer's network information?
- A. The service providers must set up MP-BGP between each other to support this inter-network routing.
- B. The service providers must set up MPLS label exchange between each other for this scenario to work.
- C. The service providers may not be aware that they are providing inter-network routing for the customer.
- D. The customer is acting as a colocation (meet-me) for an inter-network routing scenario shown in the exhibit.
Answer: A
NEW QUESTION 56
You work for a service provider that offers L3VPN services to its customers. While designing L3VPN solutions for customers, you sometimes need to share routes between routing instances as part of the design.
What are two reasons for sharing routes between routing-instances? (Choose two)
- A. to allow the service provider's OoB network to be reachable by customers
- B. so customers can reach the Internet
- C. to support network address translation
- D. so customers can reach the service provider's public cloud infrastructure
Answer: B,D
NEW QUESTION 57
Which security implementation does Juniper Networks recommend for all core routers in a service provider network?
- A. application firewall
- B. unified threat management
- C. stateless loopback firewall filter
- D. intrusion and detection prevention
Answer: C
NEW QUESTION 58
......
Valid Way To Pass Juniper's JN0-1362 Exam with : https://www.testbraindump.com/JN0-1362-exam-prep.html
